Aufgabe 7: Anwendung

Initialization of the keyboard.

Initialization of the keyboard and activation of the specific interrupt handling: The object will register itself at the Plugbox and configure the IOAPIC to receive the corresponding interrupts.

Note

The keyboard interrupts should be configured as level triggered. According to the standard we would have to check the corresponding entry in ACPI::MADS::Interrupt_Source_Override and use these values. Most likely this would suggest an edge-triggered mode – which would work as well. However, using a level-triggered mode is more forgiving because it resends the interrupt request even if an interrupt was lost (e.g. the required handling, retrieving the buffer entry, was not performed).

Prologue of keyboard interrupts.

This method directly handles interrupts caused by the keyboard. Since multiple interrupts are triggered on a keystroke (press & release) it produces not always a printable ASCII character – therefore only valid keys are handled in the Keyboard::epilogue.

Since the buffer is limited, it also ensures that a valid key is not overwritten by a subsequent prologue before it was handled in the Keyboard::epilogue.

Note

If a keystroke would exceed the buffer, the new key is dropped – previous keystrokes have a higher priority in the buffer.

Returns

true if a new Key was stored in the buffer and has to be processed in the Keyboard::epilogue.

Implements Gate.

Epilogue of keyboard interrupts.

The occurrence of a keystroke is signaled to a possibly waiting thread. For this purpose, a semaphore is used whose counter indicates how many keys are available in the keyboard buffer for retrieval.

Reimplemented from Gate.

Application interface to retrieve a Key.

This method returns the last pressed key (as an Key object). If no key has been pressed, the calling application thread is blocked until a key is available – this is achieved by using a Semaphore.

Returns

Pressed key