PS/2 Controller. More...

Enumerations
enum	Status { HAS_OUTPUT = 1 << 0 , INPUT_PENDING = 1 << 1 , SYSTEM_FLAG = 1 << 2 , IS_COMMAND = 1 << 3 , IS_MOUSE = 1 << 5 , TIMEOUT_ERROR = 1 << 6 , PARITY_ERROR = 1 << 7 }
	Flags in the PS/2 controller status register. More...

enum	KeyboardCommand : uint8_t { KEYBOARD_SET_LED = 0xed , KEYBOARD_SEND_ECHO = 0xee , KEYBOARD_SET_SPEED = 0xf3 , KEYBOARD_ENABLE = 0xf4 , KEYBOARD_DISABLE = 0xf5 , KEYBOARD_SET_DEFAULT = 0xf6 }
	Commands to be send to the Keyboard. More...

enum	Reply { ACK = 0xfa , RESEND = 0xfe , ECHO = 0xee }
	Replies. More...

enum	ControllerCommand { CONTROLLER_GET_COMMAND_BYTE = 0x20 , CONTROLLER_SET_COMMAND_BYTE = 0x60 , CONTROLLER_MOUSE_DISABLE = 0xa7 , CONTROLLER_MOUSE_ENABLE = 0xa8 , CONTROLLER_KEYBOARD_DISABLE = 0xad , CONTROLLER_KEYBOARD_ENABLE = 0xae , CONTROLLER_SEND_TO_MOUSE = 0xd4 }
	Commands for the PS/2 Controller. More...

enum	MouseCommand { MOUSE_RESET = 0xff , MOUSE_DEFAULTS = 0xf6 , MOUSE_STREAMING_DISABLE = 0xf5 , MOUSE_STREAMING_ENABLE = 0xf4 , MOUSE_SAMPLE_RATE = 0xf3 , MOUSE_ID = 0xf2 , MOUSE_REQUEST_PACKET = 0xeb , MOUSE_REQUEST_STATUS = 0xe9 , MOUSE_RESOLUTION = 0xe8 , MOUSE_SCALING_2_1 = 0xe7 , MOUSE_SCALING_1_1 = 0xe6 }
	Commands to be send to the mouse. More...

enum	Delay { DELAY_250MS = 0 , DELAY_500MS = 1 , DELAY_750MS = 2 , DELAY_1000MS = 3 }
	Delay before the keyboard starts repeating sending a pressed key. More...

enum	Speed { SPEED_30_0CPS = 0x00 , SPEED_26_7CPS = 0x01 , SPEED_24_0CPS = 0x02 , SPEED_21_8CPS = 0x03 , SPEED_20_7CPS = 0x04 , SPEED_18_5CPS = 0x05 , SPEED_17_1CPS = 0x06 , SPEED_16_0CPS = 0x07 , SPEED_15_0CPS = 0x08 , SPEED_13_3CPS = 0x09 , SPEED_12_0CPS = 0x0a , SPEED_10_9CPS = 0x0b , SPEED_10_0CPS = 0x0c , SPEED_09_2CPS = 0x0d , SPEED_08_6CPS = 0x0e , SPEED_08_0CPS = 0x0f , SPEED_07_5CPS = 0x10 , SPEED_06_7CPS = 0x11 , SPEED_06_0CPS = 0x12 , SPEED_05_5CPS = 0x13 , SPEED_05_0CPS = 0x14 , SPEED_04_6CPS = 0x15 , SPEED_04_3CPS = 0x16 , SPEED_04_0CPS = 0x17 , SPEED_03_7CPS = 0x18 , SPEED_03_3CPS = 0x19 , SPEED_03_0CPS = 0x1a , SPEED_02_7CPS = 0x1b , SPEED_02_5CPS = 0x1c , SPEED_02_3CPS = 0x1d , SPEED_02_1CPS = 0x1e , SPEED_02_0CPS = 0x1f }
	Repeat Rate of Characters. More...

enum	LED { LED_SCROLL_LOCK = 1 << 0 , LED_NUM_LOCK = 1 << 1 , LED_CAPS_LOCK = 1 << 2 }
	Keyboard LEDs. More...

Functions
void	init ()
	Initialization of connected devices. More...

bool	fetch (Key &pressed)
	Retrieve the keyboard event. More...

bool	fetch (Pointer &state)
	Retrieve the mouse event. More...

void	setRepeatRate (Speed speed, Delay delay)
	Configure the repeat rate of the keyboard. More...

void	setLed (enum LED led, bool on)
	Enable or disable a keyboard LED. More...

void	drainBuffer ()
	Empties the keyboard buffer. More...

Detailed Description

PS/2 Controller.

Initializes the PS/2 devices (Keyboard and optional Mouse), and determines both the scan code and ASCII character of a pressed key from the transmitted make and break codes using the KeyDecoder.

Note: This controller is also known as Intel 8042 (nowadays integrated in the mainboard) or Keyboard Controller. But to avoid confusion with the actual Keyboard and since we use the PS/2-compatible mode to support the Mouse as well, the name PS/2 Controller was chosen for the sake of simplicity.; Since modern PCs sometimes don't have an PS/2 connector, USB keyboards and mice are emulated as PS/2 device with USB Legacy Support.

Enumeration Type Documentation

enum PS2Controller::Status

Flags in the PS/2 controller status register.

Enumerator
HAS_OUTPUT	Output buffer non-empty?
INPUT_PENDING	Is input buffer full?
SYSTEM_FLAG	set on soft reset, cleared on power up
IS_COMMAND	Is command Byte? (otherwise data)
IS_MOUSE	Mouse output has data.
TIMEOUT_ERROR	Timeout error.
PARITY_ERROR	Parity error.

enum PS2Controller::KeyboardCommand : uint8_t

Commands to be send to the Keyboard.

Enumerator
KEYBOARD_SET_LED	Set the LED (according to the following parameter byte)
KEYBOARD_SEND_ECHO	Send an echo packet.
KEYBOARD_SET_SPEED	Set the repeat rate (according to the following parameter byte)
KEYBOARD_ENABLE	Enable Keyboard.
KEYBOARD_DISABLE	Disable Keyboard.
KEYBOARD_SET_DEFAULT	Load defaults.

enum PS2Controller::Reply

Replies.

Enumerator
ACK	Acknowledgement.
RESEND	Request to resend (not required to implement)
ECHO	Echo answer.

enum PS2Controller::ControllerCommand

Commands for the PS/2 Controller.

These commands are processed by the controller and not send to keyboard/mouse. They have to be written into the command register.

Enumerator
CONTROLLER_GET_COMMAND_BYTE	Read Command Byte of PS/2 Controller.
CONTROLLER_SET_COMMAND_BYTE	Write Command Byte of PS/2 Controller.
CONTROLLER_MOUSE_DISABLE	Disable mouse interface.
CONTROLLER_MOUSE_ENABLE	Enable mouse interface.
CONTROLLER_KEYBOARD_DISABLE	Disable keyboard interface.
CONTROLLER_KEYBOARD_ENABLE	Enable keyboard interface.
CONTROLLER_SEND_TO_MOUSE	Send parameter to mouse device.

enum PS2Controller::MouseCommand

Commands to be send to the mouse.

See also: ps2mouse

Enumerator
MOUSE_RESET	Reset and perform self-test.
MOUSE_DEFAULTS	Reset settings to default.
MOUSE_STREAMING_DISABLE	Don't report mouse movements.
MOUSE_STREAMING_ENABLE	Send data on mouse movement/button events.
MOUSE_SAMPLE_RATE	Set sample rate.
MOUSE_ID	Get device ID.
MOUSE_REQUEST_PACKET	Get movement data.
MOUSE_REQUEST_STATUS	Get status packet (responses with 3 bytes)
MOUSE_RESOLUTION	Set resolution (requires parameter)
MOUSE_SCALING_2_1	Set scaling 2:1.
MOUSE_SCALING_1_1	Set scaling 1:1.

enum PS2Controller::Delay

Delay before the keyboard starts repeating sending a pressed key.

Enumerator
DELAY_250MS	Delay of 0.25s.
DELAY_500MS	Delay of 0.5s.
DELAY_750MS	Delay of 0.75s.
DELAY_1000MS	Delay of 1s.

enum PS2Controller::Speed

Repeat Rate of Characters.

See also: The PS/2 Keyboard Interface

Enumerator
SPEED_30_0CPS	30 characters per second
SPEED_26_7CPS	26.7 characters per second
SPEED_24_0CPS	24 characters per second
SPEED_21_8CPS	12.8 characters per second
SPEED_20_7CPS	20.7 characters per second
SPEED_18_5CPS	18.5 characters per second
SPEED_17_1CPS	17.1 characters per second
SPEED_16_0CPS	16 characters per second
SPEED_15_0CPS	15 characters per second
SPEED_13_3CPS	13.3 characters per second
SPEED_12_0CPS	12 characters per second
SPEED_10_9CPS	10.9 characters per second
SPEED_10_0CPS	10 characters per second
SPEED_09_2CPS	9.2 characters per second
SPEED_08_6CPS	8.6 characters per second
SPEED_08_0CPS	8 characters per second
SPEED_07_5CPS	7.5 characters per second
SPEED_06_7CPS	6.7 characters per second
SPEED_06_0CPS	6 characters per second
SPEED_05_5CPS	5.5 characters per second
SPEED_05_0CPS	5 characters per second
SPEED_04_6CPS	4.6 characters per second
SPEED_04_3CPS	4.3 characters per second
SPEED_04_0CPS	4 characters per second
SPEED_03_7CPS	3.7 characters per second
SPEED_03_3CPS	3.3 characters per second
SPEED_03_0CPS	3 characters per second
SPEED_02_7CPS	2.7 characters per second
SPEED_02_5CPS	2.5 characters per second
SPEED_02_3CPS	2.3 characters per second
SPEED_02_1CPS	2.1 characters per second
SPEED_02_0CPS	2 characters per second

enum PS2Controller::LED

Keyboard LEDs.

Enumerator
LED_SCROLL_LOCK	Scroll Lock.
LED_NUM_LOCK	Num Lock.
LED_CAPS_LOCK	Caps Lock.

Function Documentation

void PS2Controller::init ( )

Initialization of connected devices.

All status LEDs of the keyboard are switched off and the repetition rate is set to maximum speed.

bool PS2Controller::fetch ( Key & pressed )

Retrieve the keyboard event.

Retrieves make and brake events from the keyboard. If a valid (non special) key was pressed, the scan code is determined using KeyDecoder::decode into a Key object. Events on special keys like Shift, Alt, CapsLock etc. are stored (in KeyDecoder) and applied on subsequent keystrokes, while no valid key is retrieved.

Mouse events are ignored.

Parameters

pressed Reference to an object which will contain the pressed Key on success

Returns: true if a valid key was decoded

bool PS2Controller::fetch ( Pointer & state )

Retrieve the mouse event.

If a full mouse state was retrieved (all 3 packets have been successfully processed by the MouseDecoder) the new state is retrieved. Keyboard events are not processed.

Note: fetch(Key&) has to be adjusted to not process (instead of ignore) mouse packets, or events might be lost.

Parameters

state Reference to an object which will contain the Mouse Pointer state on success

Returns: true if a valid mouse pointer state was decoded

void PS2Controller::setRepeatRate	(	Speed	speed,
		Delay	delay
	)

Configure the repeat rate of the keyboard.

Parameters

delay	configures how long a key must be pressed before the repetition begins.
speed	determines how fast the key codes should follow each other. Valid values are between `0` (30 characters per second) and `31` (2 characters per second).

void PS2Controller::setLed	(	enum LED	led,
		bool	on
	)

Enable or disable a keyboard LED.

Parameters

led	LED to enable or disable
on	`true` will enable the specified LED, `false` disable

void PS2Controller::drainBuffer ( )

Empties the keyboard buffer.

The keyboard may not send any interrupts if the buffer is not empty. To prevent unhandled keystrokes (for example during boot) the buffer should be emptied once right before allowing keyboard interrupts (even if keystrokes might be lost).

Aufgabe 5: Zeitscheiben

Enumerations

Functions

Detailed Description

Enumeration Type Documentation

Function Documentation